By SALES 1 | 20 February 2025 | 0 Comments
How to avoid the gap of rim lock when producing metal titanium frames?
In the production process of metal eyeglass frames, gap of rim lock is a common quality problem, especially when dealing with some metal titanium frames.
Recently, our customer customized a metal eyeglass frame and encountered the problem of gap of rim lock during the production process.
This article will share how we solved this problem and optimized the production process to ensure the high quality of metal glasses.
Problem Discovery
Recently, our customer customized a metal eyeglass frame and encountered the problem of gap of rim lock during the production process.
This article will share how we solved this problem and optimized the production process to ensure the high quality of metal glasses.
Problem Discovery
In the initial production stage, we followed the conventional production process.
First, we would weld the accessory ring, then weld and cut the rim lock, and then bend the nose bridge , front frame and end piece,
However, after the sample came out, we found that the problem of rim lock gap was very obvious. The reason is that this eyeglass frame uses a 600 base, and the end piece curving bend is very close to the rim lock position.
During the bending operation, the rim lock is easily pulled apart, resulting in a gap.
Solution: Adjust the production process
First, we would weld the accessory ring, then weld and cut the rim lock, and then bend the nose bridge , front frame and end piece,
However, after the sample came out, we found that the problem of rim lock gap was very obvious. The reason is that this eyeglass frame uses a 600 base, and the end piece curving bend is very close to the rim lock position.
During the bending operation, the rim lock is easily pulled apart, resulting in a gap.
Solution: Adjust the production process
In order to avoid the problem of gap, our production department discussed and adjusted the process.
We decided to change the production process to: first cut the accessories and weld the frame, then curve the nose bridge, front frame and end piece, and finally weld and cut the rim lock
We decided to change the production process to: first cut the accessories and weld the frame, then curve the nose bridge, front frame and end piece, and finally weld and cut the rim lock
Through this new process, we can ensure that the rim lock position is processed in the last link, thus avoiding the situation where the rim lock is pulled apart and successfully solving the problem of leaking seams.
Summary
Summary
The production of metal titanium eyeglass frames requires precise process control, especially during welding and bending, any slight gap may lead to quality problems.
By adjusting the production process, we can effectively avoid the problem of rim lock leaking seams and ensure the quality of the final product.For manufacturers engaged in the production of metal eyeglass frames, mastering the details of welding, bending and other technologies and optimizing the production process according to actual conditions are the key to improving product quality.
By adjusting the production process, we can effectively avoid the problem of rim lock leaking seams and ensure the quality of the final product.For manufacturers engaged in the production of metal eyeglass frames, mastering the details of welding, bending and other technologies and optimizing the production process according to actual conditions are the key to improving product quality.
When producing metal eyewear, ensuring that every step is accurate can create seamless high-quality metal eyeglasses.
Keep in mind the importance of "Rim lock" and "welding" to ensure that the frame and lens are firmly combined to avoid any quality problems that affect wearing.
Detail Of The Manufacturing Process Of Titanium Eyeglasses& Prescription Glasses
How to Fix Misalignment in Metal Frame Glasses by Adjusting Hinges?
Leave a Reply
Your email address will not be published.Required fields are marked. *